ABB Low Voltage Switchgear

Product Details:

The AF116-30-11-13 is a 3 pole - 690 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and double clamp, controlling motors up to 55 kW / 400 V AC (AC-3) or 75 hp / 480 V UL and switching power circuits up to 160 A (AC-1) or 160 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

Product Details:

The B6-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

Product Details:

Main features

• Up to 560 kW - 400 V AC-3, 900 hp - 480 V and 2850 A - 690 V AC-1, 2850 A - general use
• Only 4 coils cover 24 V - 500 V AC and 20 V - 500 V DC
• Dedicated 24 V DC coil for direct control by PLC-output > 250 mA, low holding consumption up to 1.7 W.
• Screw, Push-in Spring and ring tongue connection types
• Built-in surge suppression
• Connection sets and interlock unit for reversing and star-delta starter for an easy, fast and secure assembly of starters
• Mirror and mechanically linked contacts.

Product Details:

MCCB stands for Molded Case Circuit Breaker. It is another type of electrical protection device which is used when load current exceeds the limit of a miniature circuit breaker. The MCCB provides protection against overload, short circuit faults and is also used for switching the circuits.

Product Details:

Other Details :
This page contains technical data sheet, documents library and links to offering related to this product. If you require any other information, please contact us using form located at the bottom of the page



Product ID:
1SBL181024R8010

EAN:
3471522300805

Long Description:
UA16..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. The UA..RA series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 1 built-in auxiliary contact - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.


Classifications
Object Classification Code:
  Q

ETIM 4:
EC001079 - Capacitor magnet contactor

ETIM 5:
EC001079 - Capacitor magnet contactor

ETIM 6:
EC001079 - Capacitor contactor

ETIM 7:
EC001079 - Capacitor contactor

UNSPSC:
39121529

Container Information

Package Level 1 Units:
 1 piece

Package Level 1 Width:
135 mm

Package Level 1 Depth / Length:
155 mm

Package Level 1 Height:
63 mm

Package Level 1 Gross Weight:
 0.46 kg

Package Level 1 EAN:
3471522300805

Package Level 2 Units:
box 63 piece

Package Level 2 Width:
300 mm

Package Level 2 Depth / Length:
 245 mm

Package Level 2 Height:
308 mm

Package Level 2 Gross Weight:
28.98 kg

Package Level 3 Units:
260 piece

Certificates and Declarations (Document Number)

CB Certificate:
CB_CN44756

CCC Certificate:
 CCC_2018010304059154

CSA Certificate:
CSA_1041746

Declaration of Conformity - CE:
 1SBD250805U1000

EAC Certificate:
EAC_RU C-FR ME77 B02628

Environmental Information:
1SBD250123E1000

GOST Certificate:
GOST_POCCFRME77B07175

Instructions and Manuals:
 1SBC101002M5501

RoHS Information:
1SBD250805U1000

UL Certificate:
UL_20160205-E312527-10-2

UL Listing Card:
UL_E312527

Product Details:

For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. The travel times of the drive are detected automatically via current detection. To protect the drives, the output contacts are electromechanically locked against each other. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs.

Product Details:

Other Details :
This page contains technical data sheet, documents library and links to offering related to this product. If you require any other information, please contact us using form located at the bottom of the page.

General Information

Product ID:
1SDA066577R1

EAN:
8015644002671

Catalog Description:
RHE_H XT1..XT4 HANDLE R.D.ADJ.ROT.HAN

Long Description:
HANDLE FOR ADJUSTABLE DEPTH ROTARY HANDLE XT1..XT4

Ordering
EAN:
8015644002671

Minimum Order Quantity:
1 piece

Customs Tariff Number:
85389099


Container Information

Package Level 1 Units:
1 piece

Package Level 1 Width:
145 mm

Package Level 1 Height:
40 mm

Package Level 1 Depth / Length:
250 mm

Package Level 1 Gross Weight:
0.124 kg

Package Level 1 EAN:
8015644002671

Additional Information

Configuration Type:
Loose or configurable

Order Multiple:
1 piece

Product Main Type:
Accessories for Tmax XT

Product Name:
Accessory

Product Type:
ACC

Standards:
IEC 60947-2

Certificates and Declarations (Document Number)

Data Sheet, Technical Information:
1SDC210100D0205
1SDC210099D0205

Instructions and Manuals:
1SDH000719R0605

Classifications

ETIM 6:
EC000229 - Handle for power circuit breaker

ETIM 7:
EC000229 - Handle for power circuit breaker

Object Classification Code:
  Q

UNSPSC:
39120000

WEEE Category:
 5. Small Equipment (No External Dimension More Than 50 cm)

Product Details:

Other Details :

• ABB fuse links guarantee maximum protection against all faults. The higher the voltage, the better the protection that can be achieved with the fuse link

• For protection of motor circuits in which operational short-term overloads and short-circuits occur Short circuit protection for switching devices such as contactors and circuit-breaer

Product Specification

Product Details:

Delta’s MS300 series is a standard compact vector control drive that inherits Delta’s superior drive technology. It supports both IM and PM motor control for application flexibility and provides STO safety mechanism. Also built-in various essential functions, including PLC capacity for simple programming needs, a communication slot for various communication cards, and a USB port to make data uploads and downloads fast and easy. Saving space, reducing setup and wiring time, while providing high efficiency and stability system —all included in the MS300 series with drive size reduced up to 40%.

Product Details:

The AF400-30-11-70 is a 3 pole - 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 200 kW / 400 V AC (AC-3) or 350 hp / 480 V UL and switching power circuits up to 600 A (AC-1) or 550 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

Product Details:

GAE75 contactors are designed for DC circuit switching. Arc suppression is more difficult in DC than in AC. To choose a contactor, it is necessary to know the current and voltage to be broken as well as the L/R time constant of the power circuit to be controlled. GAE 75 contactors are of the block type design. - Main poles: the contactors are fitted with arc chutes with permanent magnets specially designed for DC breaking. The three contactor paths are arranged in series via two supplied and fitted insulated connections (25 mm²). The GAE75 are "single-pole" devices for which the connection polarities indicated next to the connection terminals must be respected. Furthermore, they are marked 1L1 for the positive terminal and 2T1 for the negative terminal. - Auxiliary contact: 1 CAL 5-11 side-mounted add-on auxiliary contact block (GAE75-10-11 types) - Control circuit: DC operated with standard double-winding DC coils (with add-on factory-mounted lagging contact for insertion of the"holding" winding) - Accessories: a wide range of accessories is available

Product Details:

A 3-phase Contactor suitable for various applications such as Motor starting, Isolation, By-pass and Distribution application up to max 1000 V.Operated with control voltage, versions from 24….690 AC, 50 and 60 Hz

Product Details:

A circuit breaker is an electrical safety device designed to protect an electrical circuit from damage caused by overcurrent. Its basic function is to interrupt current flow to protect equipment and to prevent the risk of fire. Unlike a fuse, which operates once and then must be replaced, a circuit breaker can be reset (either manually or automatically) to resume normal operation.

Circuit breakers are made in varying sizes, from small devices that protect low-current circuits or individual household appliances, to large switchgear designed to protect high voltage circuits feeding an entire city. The generic function of a circuit breaker, or fuse, as an automatic means of removing power from a faulty system, is often abbreviated as OCPD (Over Current Protection Device).

Product Details:

Delta’s MS300 series is a standard compact vector control drive that inherits Delta’s superior drive technology. It supports both IM and PM motor control for application flexibility and provides STO safety mechanism. Also built-in various essential functions, including PLC capacity for simple programming needs, a communication slot for various communication cards, and a USB port to make data uploads and downloads fast and easy. Saving space, reducing setup and wiring time, while providing high efficiency and stability system —all included in the MS300 series with drive size reduced up to 40%.

Product Details:

Delta’s MS300 series is a standard compact vector control drive that inherits Delta’s superior drive technology. It supports both IM and PM motor control for application flexibility and provides STO safety mechanism. Also built-in various essential functions, including PLC capacity for simple programming needs, a communication slot for various communication cards, and a USB port to make data uploads and downloads fast and easy. Saving space, reducing setup and wiring time, while providing high efficiency and stability system —all included in the MS300 series with drive size reduced up to 40%.

Product Details:

The CR-MX230AC2L pluggable interface relay is from the CR-MX (miniature) relay range. This relay operates with a 230 V AC rated control supply voltage and has a 2 c/o (SPDT) output with contacts rated at 250 V / 7 A. The relay has an integrated LED. Standard sockets, pluggable function modules, holders and markers are available as accessories.

Product Details:

The CM-MPSx3 are multifunctional monitoring relays for three-phase mains. They monitor the phase parameters phase sequence, phase failure, over- and undervoltage and phase unbalance. CM-MPS.23 also monitors the neutral for interruption. The threshold values for over and undervoltage and phase unbalance are adjustable. CM-MPS.23 is also suitable for monitoring single-phase mains. For this, all three external conductors (L1, L2, L3) have to be jumpered and connected as one single conductor. Phase sequence monitoring has to be deactivated and the threshold value for phase unbalance has to be set to the maximum (25 %).

Product Details:

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

Product Details:

Motor starting is the most common application in the world's industry. When it comes to open starter, you can easily select your direct-on-line, reversing and star-delta starter, in kit form, through our selection tables. Optimized selection of short-circuit protection and switching devices makes starting solutions simple and reliable. We also provide communication capable motor starters. For a compact enclosed direct-on-line starter, DRAS will be the right choice.

Product Details:

The AF09-30-10-13 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

Product Details:

3 wire connection (neutral conductor required). For Busch-Watchdog 180 FP sensor for All Weather 44 6800-3x-102C. For comfort timer control element 6455-101-500. For Busch-Watchdog 180 flush-mounted Sensor Standard 6810-21x-101. For Busch-Watchdog 180 flush-mounted sensor Comfort II 6800-xxx-104 and 6800-xxx-104M. For Busch-Watchdog Presence tech 6813-xxx-101 und 6813/11-xxx. For Busch-Remote control IR control cover 6067-xxx-10x. For control cover with control lamp 6543-xxx-10x. Combinable with Busch-Watchdog extension insert 6805 U. Operation also possible via conventional push buttons (2020 US, 2021/6 UK).

Product Details:

Auxiliary contacts HK1 change position with the main contacts of the manual motor starter. They are mounted laterally on the right side of manual motor starters MS116, MS132 or MS165. Auxiliary contacts HK1 are available as normally open or normally closed contacts.

Product Details:

N... contactor relays are used for switching auxiliary circuits and control circuits - Poles: 4-pole contactor relays (mechanically linked contact elements available) - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Product Details:

Other Details :
This page contains technical data sheet, documents library and links to offering related to this product. If you require any other information, please contact us using form located at the bottom of the page

General Information

Product ID:
1SAX221001R1102

EAN:
4013614403972

Catalog Description:
EF45-45 Electronic Overload Relay

Long Description:
The EF19-0.32 is an self-supplied electronic overload relay, which means no extra external supply is needed. It offers reliable and fast protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the contactors. Single mounting kits are available as accessory.The EF19 and EF45 have ATEX and IECEx certification 1)

 1) ATEX is valid for products produced from week 42, 2014.
 IECEx is valid for products produced from week 15, 2017.


Ordering

Minimum Order Quantity:
 1 piece

Customs Tariff Number:
85364900


Popular Downloads

Data Sheet, Technical Information:
2CDC107025D0201

Data Sheet, Technical Information (Part 2):
1SAX100509F0001
1SAX100510F0001

Instructions and Manuals:
 2CDC107023M6803

Instructions and Manuals (Part 2):
2CDC107043M6801

Dimension Diagram:
1SAX200403F0001

Technical

Number of Auxiliary Contacts NC:
 1

Number of Auxiliary Contacts NO:
1

Number of Protected Poles:
3

Conventional Free-air Thermal Current (Ith):
Auxiliary Circuit NC 6 A
Auxiliary Circuit NO 6 A

Rated Operational Current AC-15 (Ie):
(240 V) NC 3 A
(240 V) NO 3 A
(400 V) NC 1.1 A
 (400 V) NO 1.1 A
(500 V) NC 0.75 A
(500 V) NO 0.75 A

Rated Operational Current DC-13 (Ie):
(125 V) NC 0.55 A
(125 V) NO 0.5 A
(24 V) NC 1.5 A
(24 V) NO 1.5 A
(250 V) NC 0.27 A
(250 V) NO 0.27 A
 (60 V) NC 0.55 A
(60 V) NO 0.55 A

Connecting Capacity Auxiliary Circuit:
Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²
Flexible 1/2x 0.75 ... 2.5 mm²
Rigid 1/2x 1 ... 4 mm²

Connecting Capacity Main Circuit:
Flexible with Ferrule 1/2x 2.5 ... 10 mm²
Flexible with Insulated Ferrule 1/2x 2.5 ... 10 mm²
Flexible 1/2x 2.5 ... 10 mm²
 Rigid 1/2x 2.5 ... 16 mm²

Tightening Torque:
Auxiliary Circuit 0.8 ... 1.2 N·m
Main Circuit 2.3 ... 2.6 N·m

Wire Stripping Length:
Auxiliary Circuit 9 mm
Main Circuit 13 mm

Recommended Screw Driver:
Auxiliary Circuit Pozidriv 2
Main Circuit Pozidriv 2

Mounting Position:
Position 1 to 6

Power Loss:
at Rated Operating Conditions per Pole 0.059 ... 0.527 W

Suitable For:
AF26
AF30
AF38

Product Details:

Surge Protective Devices are designed to protect against transient surge conditions. Large single surge events, such as lightning, can reach hundreds of thousands of volts and can cause immediate or intermittent equipment failure. However, lightning and utility power anomalies only account for 20% of transient surges. The remaining 80% of surge activity is produced internally. Although these surges may be smaller in magnitude, they occur more frequently and with continuous exposure can degrade sensitive electronic equipment within the facility.

Product Details:

We touch them every day. Light switches and sockets are an integral part of our living space and are used to control various devices in any type of building. Company wiring accessories are offered in numerous design series, in a variety of shapes, designs, color combinations and materials to meet not only functional but also aesthetic requirements and individual preferences.

All you need to do is to choose and make your home even more beautiful and comfortable.

Product Details:

The communications module encodes the message onto the network's physical medium representing a link to another system. If the communications module implements a best-effort message service, it generates the confirm primitive as soon as the message has been encoded onto the medium.

Additional Information:

• Delivery Time: IMMEDIATE

Product Details:

For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other.

Product Details:

Other Details:

• This page contains technical data sheet, documents library and links to offering related to this product. If you require any other information, please contact us using form located at the bottom of the page

Product Details:

UA50..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. The UA..RA series 3-pole contactors are of the block type design. - Main poles: 3 main poles - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Product Details:

The DS201 series is a 1P+N RCBO in two-modules width for the protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating earth fault currents; protection against indirect contacts and additional protection against direct contacts (with sensitivity = 30 mA).

Product Details:

ABB MAKE SMPS CP-E 24 V DC / 5 A
The CP-E 24/5.0 is a power supply from the CP-E range. The primary switch modepower supply offers a wide range input of 90-132 V AC, 180-264 V AC and 210-375 V DC,rated input voltage is 115 or 230 V AC (auto select). The rated output power is 120 W,rated output current is 5 A at an output voltage of 24 V DC. The output voltage isadjustable within a range of 22.5 to 28.5 V DC. The power supply provides an U/Ioutput characteristic. In order to increase capacity, up to 3 units can be connected inparallel. A redundancy unit is available as accessory.

Additional Information:

• Item Code: 1SVR427034R0000

Product Details:

M1M 12 is a multi-function meter for complete electrical system monitoring, providing the measurement of: Active Energy, Active Power, Power Factor, Voltage, Current, Frequency, On Hours and Load Hours M1M 10 and M1M 12 offer exactly what is basically needed to monitor in an electrical system.

Product Details:

Other Details :
This page contains technical data sheet, documents library and links to offering related to this product. If you require any other information, please contact us using form located at the bottom of the page.

General Information
Extended Product Type:
OTM1000E4C3D230C

Product ID:
1SCA112852R1001

EAN:
6417019454979

Catalog Description:
OTM1000E4C3D230C AUTOMATIC C/O SWITCH

Long Description:
Including a handle for manual operation, PCB connectors, bolt kit with nuts and washers for all terminals. Including a voltage sensing kit on the top of the switch. Voltage sensing kit on the bottom on the switch, available on request, please add letter “B” to the type code. For example, OTM160E4C8D230C????OTM160E4CB8D230C. Include a storage clip for the handle and spare fuses.

Categories
Products » Low Voltage Products and Systems » Switches » Change-over and Transfer Switches » Automatic Transfer Switches OMD

Popular Downloads
Data Sheet, Technical Information:
1SCC303003C0201

Instructions and Manuals:
1SCC303003M0206

Technical
Rated Operational Current AC-21A (Ie):
(380 ... 415 V) 1000 A
(500 V) 1000 A
(690 V) 1000 A

Rated Operational Current AC-22A (Ie):
 (380 ... 415 V) 1000 A
 (500 V) 1000 A
(690 V) 1000 A

Rated Operational Current AC-23A (Ie):
(380 ... 415 V) 1000 A
(500 V) 1000 A
(690 V) 1000 A

Rated Operational Current AC-31B (Ie):
(380 ... 415 V) 1000 A

Rated Operational Current AC-33B (Ie):
(380 ... 415 V) 1000 A

Rated Operational Power AC-23A (Pe):
(380 ... 415 V) 560 kW
(500 V) 710 kW
(690 V) 1000 kW

Handle Type:
Direct mounted handle

Fourth Pole Position:
Right Side

Fourth Pole Type:
Switched - Simultaneous Function

Switches Operating Mechanism:
Mechanism at the End of the Switch

Distance Between Phases:
Standard

Position of Line Terminals:
Supplies on Top - Load on Bottom

Operating Mode:
Front operated

Certificates and Declarations (Document Number)
Declaration of Conformity - CE:
1SCC303029D0202

Instructions and Manuals:
1SCC303003M0206

RoHS Information:
1SCC303036D0202

Container Information

Package Level 1 Units:
1 piece

Package Level 1 Width:
580 mm

Package Level 1 Depth / Length:
780 mm

Package Level 1 Height:
500 mm

Package Level 1 Gross Weight:
66 kg

Package Level 1 EAN:
6417019454979

Classifications
Object Classification Code:
Q

ETIM 5:
EC000216 - Switch disconnector

ETIM 6:
EC000216 - Switch disconnector

ETIM 7:
EC000216 - Switch disconnector

WEEE Category:
4. Large Equipment (Any External Dimension More Than 50 cm)